Dmson's Metal Pvt Ltd
Mumbai, Maharashtra
GST No. 27AACCD6037D1ZY
TrustSEAL Verified
SEND SMS
SEND EMAIL
Our Mild Steel Plates are available in different sizes and specifications to meet the requirements of clients. These are sourced from reliable vendors and widely used in hydraulic press manufacturing, dam gates and cranes manufacturing.
Product Details:
| Thickness | 2-250MM |
| Material Grade | HOT ROLLED MILD STEEL PLATES |
| Material | Mild Steel |
| Usage/Application | COMMERCIAL USE |
| Standard | IS |
| Width | 1250-2500mm |
Product Details:
| Thickness | 25 mm |
| Length | 6m-9m |
| Surface Treatment | Coated |
| Technique | Hot Rolled |
| Width | 1250 mm - 2500 mm |
Product Details:
| Grade | A,B |
| Standard | IS 2062 |
| Elongation Min % | 23 |
| Tensile Mpa | 410 |
| Material | Mild Steel |
We offer Indian Mild Steel Plates that innovative technology and efficient machines to develop a wide range of Mild steel sheets and plates. These products are used in various industries and are appreciated for their attributes of high tensile strength, corrosion resistance & long life usage. As per the definite demands of our customers, we can customize our mild steel sheets and plates on the parameters of shapes and sizes.
Product Details:
| Surface Treatment | Polished |
| Grade | S275,S355 |
| Thickness | 12-15 mm, 8-12 mm |
| Material | Mild Steel |
Product Details:
| Surface Treatment | Coated |
| Type | Steel Plate |
| Thickness | 8-12 mm, 12-15 mm |
| Carbon Steel % | 0.9 |
Our European Mild Steel Plates is used everyday which will rust (ie. it is not stainless steel). Many people have made reference to the carbon content of mild steel and unless you know what this does then it is pointless. Low carbon steel such as mild steel will be quite soft and malleable so can be bent and formed into different shapes with minimal heat treatment. Higher carbon steels (up to about 0.9%) can be hardened using a method of heating and quenching (fast cooling in oil or brine) to a point where they can be used for cutting other steels, you would know high carbon steel as a drill bit or lathe tool.
Product Details:
| Material | Mild Steel |
| Chemical Properties % | C - 0.25, Mn - 0.80-1.20, S - 0.050, P - 0.050, Si - 0.40 |
| Yield Min Mpa | 250 |
| Tensile Mpa | 400-550 |
| Elongation Min % | 18 |
| Impact | 27J at 0 deg C |
We export American Mild Steel Plates that are designed using mild steel is low carbon steel, steel that is not hard and brittle, the stuff that plates and structural shapes. It is referred to low carbon steel; typically the grades 1005 through 1025, which is usually used for structural applications. With too little carbon content to through harden, it is weldable, which expands the possible applications.
Product Details:
| Grade | SS400 |
| Thickness | 6mm-400mm |
| Tensile Mpa | 400-510 |
| Chemical Composition | C - 0.22,Mn - 1.30,S - 0.035,P - 0.035,Si - 0.35 |
Our range of Japanese Mild Steel Plates conforms to the Japanese standard. These Japanese industrial standard specifies the hot-rolled mild steel plates, sheets and used fort machinery like transit mixers/ tower crane / batching plant/ concrete pumps/ asphalt plants.
Refer Pdf for detailed specifications
Product Details:
| Grade | Q 235 |
| Yield Min Mpa | 375-500 |
| Inpact | 27J at 20 deg C |
| Chemical Properties % | C - 0.14- 22, Mn - 0.30-0.65, S - 0.050, P - 0.045, Si - 0.03 |
Our China Mild Steel Plates have metallurgical features of steel plates with ultra fine grains surface layers and science and technology Nova research item of China use in manufacturing reinforcement steel bar galvanized steel coil.
Refer PDF for detailed specifications
